2. Insert the newly purchased CPU in the correct direction, and apply a layer of silicone grease on the top of the CPU. Do not apply too much, it is ideal to just fill the gap between the top of the CPU and the heat sink. (Take the small sticks of silicone grease in the needle tube as an example, squeeze 2-3 small grids of silicone grease on it)
3. Reinstall the heat sink, first press the heat sink with your fingers and move it up and down, left and right, so that the silicone grease inside spreads out evenly and exhausts the air, and then follow the numerical order marked on the fixing screw on the heat sink (or diagonally) Tighten the screws one by one, and then unscrew one screw each time a few turns. Do not screw one screw to the end at a time, rotate one by one until the balanc
- After Sale Support